Transparent punk technology fan, original charging experience, Mcdodo transparent magnetic suction wireless charging evaluation

Previously, the charging head network introduced a variety of Mcdodo's magnetic charging treasures, which have almost the same charging experience as the original ones; today, the charging head network brings users the "MagSafe" charging cable, transparent punk design, high performance Is the performance still excellent?

The detailed parameter information of the magnetic wireless charging is printed on the back of the silver-white case.

Name: CH-233 Transparent Magnetic Wireless Charger; Model: CH-233;

Input: 5V3A, 9V3A; Output: 5W, 7.5W, 10W, 15W;

Port: USB-C; Weight: 55g; Dimensions: 59.6mm × 7.3mm.

Take out all the items in the package, except Maiduoduo transparent magnetic suction wireless charger, also comes with user instruction manual, multilingual warranty manual, etc.

The transparent magnetic wireless charging adopts the Haoyue silver metal coating process as a whole, which brings a sense of frosted metal; in addition, it adopts an integrated USB-C braided wire design, which has better wear-resistant and scratch-resistant characteristics, and has a longer service life.

The specification information of the transparent magnetic wireless charging is attached to the line body, which is consistent with the parameters described above, so I won’t go into details.

The surface of the magnetic suction module of the transparent magnetic suction wireless charging is designed with tempered glass, and the 16 magnets reveal a metallic silver luster, and the design of strengthening the magnetic suction can enhance the heat dissipation capacity; the second is the most conspicuous densely arranged ring copper wires design, the unique cross symbol in the middle is the exclusive logo of this transparent series.

Round transparent bin part of the circuit PCB board materials clearly visible, printed in the middle of the "Mcdodo" brand name, transparent punk design language; Outside the transparent bin design, namely the circular metal drawing area is printed with charging power information, up to 5V3A 15W charging, up to 9V3A input support.

After the magnetic wireless charging is connected to the power supply, the outermost circular area of the transparent compartment has a warm white LED light strip. During the charging process, it will show a breathing state. Depending on the saturation level of the mobile phone, the breathing intensity is different.

The terminal with its own USB-C cable is designed with full PIN pins inside.

The overall length of the transparent magnetic wireless charger is about 104.8cm.

The diameter is approximately 59.58mm.

Wireless charging thickness is about 7.23mm

Compared with Apple's original MagSafe module, Maiduoduo transparent magnetic wireless charging is relatively larger and more technological.

Magnetic scene

Now that magnetic charging is possible, let’s take the new iPhone 14 series as an example to test the performance of compatibility, charging power and magnetic attraction.

The iPhone 14 is tested for adaptation. Compared with the previous generation of iPhone 14, the camera module is the same size as the 13 Pro series, but there is no problem in terms of adaptation.

The fit test was carried out on the iPhone 14 Plus. Since it has the same body size as the iPhone 14 Pro Max and the camera module remains unchanged, there is no problem with the fit.

Use Apple's original 35W charger (A2676) to connect to Maiduoduo transparent magnetic suction wireless charger. The measured input power is 0.26W, which can be ignored when it is idle.

Use Apple's original 35W charger (A2676) to connect to Maiduoduo transparent magnetic suction wireless charger to magnetically charge the iPhone 14. The measured input power is 9.61W.

In terms of magnetic attraction, the swing test of the iPhone 14 was simulated after connecting the mobile phone during daily use. The measured magnetic attraction is no different from the original MagSafe charging cable.

For the full charging test of Mcdodo15W magnetic wireless charging, the mobile phone selected this time is iPhone14 Pro. Put the Mcdodo magnetic wireless charger and 35W charger into a 25°C incubator, and then attach the magnetic wireless charger to the back of the phone. The figure below is the measured data.

This is a full diagram of the power change of the iPhone 14 Pro using the Mcdodo15W magnetic wireless charger. The whole process is roughly divided into 3 stages. Within 1 hour and 40 minutes after the start of the test, the input power was around 10W; after 1 hour and 41 minutes, the power dropped It reaches about 8W and lasts for 20 minutes; after 2 hours and 2 minutes, it enters trickle charging until it is fully charged, and the whole charging process takes 2 hours and 40 minutes.

Drawing the whole charging process into a graph, it can be seen that Mcdodo15W magnetic suction wireless charging can charge iPhone14 Pro 46% in half an hour, 89% in one hour, and it takes 2 hours and 40 minutes to fully charge.

temperature test

During the charging process, the heating degree of the charger is also an important part of the test. The charger is placed in a 25°C incubator throughout the experiment, and the Mcdodo15W magnetic suction wireless charger is used to charge the iPhone 14 Pro in a simulated 220V50Hz mains environment. Hours, collect the data of the surface temperature after charging for one hour, the figure below is the measured data.

It can be seen from the figure that the Mcdodo15W magnetic wireless charger charges the iPhone 14 Pro for one hour, and the maximum temperature is 38.1°C. For daily use, it does not feel hot, and the touch feels gentle.

It can be seen from the figure that the Mcdodo 15W magnetic suction wireless charger charges the iPhone 14 Pro for two hours, and the maximum temperature is 38.4°C. During the charging process, the temperature is relatively stable and does not fluctuate much.

Summarize

Mcdodo magnetic suction wireless charging is designed with Haoyue silver metal coating to create a metal frosted texture; it has a full perspective design, and the internal components are clearly visible; it also has indicator light, which resembles the energy core of Iron Man; making the wireless charging full of futuristic technology punk style, Subverting the traditional shape, it has both appearance and practicality.

Although the diameter and thickness of Mcdodo's magnetic wireless charger are slightly higher than Apple's original MagSafe charging cable, the overall difference is controlled at about 5mm, which is still light and thin; at the same time, it supports a wireless output power of up to 15W, and the magnetic suction model is compatible with iPhone models. Full, regardless of the iOS camp or the Android camp, it can meet the needs of wireless charging; the actual measurement uses an Apple 35W charger to charge the iPhone 14 Pro through the USB-C port, and it takes 2 hours and 40 minutes to fully charge.

Overall, the Mcdodo magnetic wireless charger has excellent temperature performance in daily use, with a maximum temperature of 38.4°C, slightly higher than the average temperature of the human body, and it feels only warm; in actual use, the user can fix it with a ring glue. The desktop, bedside and other places can be charged as needed, and the battery life of the device will continue to change.

ChangZhou un-Rise Electronic Co.,Ltd.

ChangZhou Elec IMP&EXP CO.,LTD.

Dec 31th , 2022